Mini Shock Absorbers

JTECH Srl of Turin (Piedmont) is an importer and distributor for Italy of IZMAC industrial shock absorbers.

Mini Self-Compensating Shock Absorbers sizes from M4 to M36

The fixed calibration self-compensating series allows to apply the hydraulic decelerator correctly dimensioned during the design phase choosing from the various hardnesses available. Once installed, it guarantees linear deceleration even in the presence of small variations compared to what has been dimensioned. The precision in deceleration control has been exceptionally improved compared to other products currently on the market. The piston diameter has been increased, increasing its absorption capacity by 200% and the "effective mass" range has been further expanded.

• The external body, fully threaded, can be mounted and fixed in precise positions and its larger surface can dissipate more thermal energy
• The surface treatment of the body has improved corrosion resistance with a special Fuchs coating
• The stop collar is not necessary, both in the models without the head and with the head. With the head, the impact noise decreases considerably thanks to the polyurethane insert
• The bearing, made with material for long-term use, protects the seal and guarantees a long life
• Standard speed range: 0.1 ~ 5 m/s
• Standard temperature range: -10 ~ 80 °C - Special: -40 ~ 120 °C

Main models:

IASS sizes from M4 to M36

Learn more...

 

Mini Adjustable Shock Absorbers sizes from M10 to M36

This series has a 12 step fine adjustment screw based on the impact speeds. The precision in deceleration control has been exceptionally improved compared to other products currently on the market. The piston diameter has been increased, increasing its absorption capacity by 200% and the "effective mass" range has been further expanded.

• The external body, fully threaded, can be mounted and fixed in precise positions and its larger surface can dissipate more thermal energy
• The surface treatment of the body has improved corrosion resistance with a special Fuchs coating
• The stop collar is not necessary, both in the models without the head and with the head. With the head, the impact noise decreases considerably thanks to the polyurethane insert
• The bearing, made with material for long-term use, protects the seal and guarantees a long life
• The 12-step fine adjustment ensures maximum calibration accuracy during commissioning
• Standard speed range: 0.1 ~ 5 m/s
• Low Velocity: option
• Standard temperature range: -10 ~ 80 °C - Special: -40 ~ 120 °C

Main models:

IAAS sizes from M10 to M36

Learn more...

 

Available Accessories:

Lock Nut Allows the clamping of the shock absorber in a hole		Learn more...
Stop Collar Reduces the used stroke of the shock absorber while maintaining the mechanical stop		Learn more...
Clamp Mount Fixing support, internally threaded with screw tightening		Learn more...
Side Load Adapter In non-axial applications with an offset angle greater than 3°, mounting a direction corrector reinforces the shock absorber stem and extends its life		Learn more...